# Topst vcp-g 관련 port 연결 문의

**URL:** <https://community.topst.ai/t/topst-vcp-g-port/422>\
**Category:** VCP\
**Created:** [March 7, 2025, 12:44am UTC](https://community.topst.ai/t/topst-vcp-g-port/422 "2025-03-07T00:44:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nayeho](https://yyz2.discourse-cdn.com/flex004/user_avatar/community.topst.ai/nayeho/32/1123_2.png) [@nayeho](https://community.topst.ai/u/nayeho)\
**Post date:** [March 7, 2025, 12:44am UTC](https://community.topst.ai/t/topst-vcp-g-port/422/1 "2025-03-07T00:44:39Z")

</div>

안녕하세요. 대한상공회의소 서울기술교육센터 나예호 교수입니다.  
TOPST VCP-G를 활용해보려고 하는데  
DC전원이 인가된 이후 FWDN Port와 컴퓨터를 연결하여  
Adruino IDE에서 여러가지 작업을 진행해보려고 하는데  
Port 자체가 컴퓨터에서 잡히질 않아  
Port를 설정하는 방법이 따로 있는지 문의드립니다.

---

<div class="post-metadata">

**Author:** ![TOPST-Admin](https://yyz2.discourse-cdn.com/flex004/user_avatar/community.topst.ai/topst-admin/32/381_2.png) [@TOPST-Admin](https://community.topst.ai/u/TOPST-Admin)\
**Post date:** [March 12, 2025, 2:02am UTC](https://community.topst.ai/t/topst-vcp-g-port/422/2 "2025-03-12T02:02:00Z")

</div>

안녕하세요.  
해당 문의에 답변 드립니다.

컴퓨터에서 잡히지 않는다는 말씀이, 작업관리자에 COM으로 잡히지 않는다는 말씀이신 것이실까요?  
아래 페이지에서 CP210x Windows Drivers 설치 후 사용 부탁드립니다.

> **[CP210x USB to UART Bridge VCP Drivers - Silicon Labs](https://www.silabs.com/developer-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads)**
>
> The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.

감사합니다.